How Can This Extinguisher Be Identified?

Water and watermist extinguishers feature red labelling. It is critical that each fire extinguisher can be quickly and clearly identified in the event of a fire. That's why we provide a quality Fire Extinguisher ID sign FREE with every extinguisher to help you meet obligations more easily and for less cost.

What Is A Watermist Extinguisher?

Utilising a specially designed nozzle, the multimist extinguisher generates a fine mist of water molecules. These tiny ‘water mist’ droplets have a surface area coverage many times higher than water in its natural state. The principle is simple: the smaller the particles of water, the further they spread and the faster they cool. On contact with the flames, the water mist turns into steam and envelopes the fire. This blanket effect cools the blaze down and brings the oxygen supply to below combustion levels. Without oxygen or heat, the fire dies out and because this isn’t water in its natural state, the dangers of electrocution and flooding are eliminated. This powerful, reliable, efficient extinguisher can be used on different classes of fire and what’s more, since no synthetics or chemicals are used in the process, multimist causes minimal collateral damage.

What Type Of Fire Can This Be Used On?

It is designed to combat Class A and Class F fires and is safe for inadvertent use on electrically started fires. Class A fires are caused by flammable solids, such as plastics, wood, paper, straw, coal, textiles, furniture, etc. Most of these materials are organic or referred to as ‘carbonaceous materials’. Class A fires are common in a variety of settings and they can spread quickly if there are enough combustible materials, oxygen, and heat to sustain the fire. Commercial and industrial premises typically contain a large number of common combustibles, so preventing Class A fires requires knowledge, vigilance, and regular inspection of premises to ensure fire hazards are minimised.

Class F fires are fires which involve cooking oil or fat. Though technically a sub-class of fires caused by flammable liquids or gases, they differ from conventional fires due to the extremely high temperatures involved.

What Is The Lifespan Of A Fire Extinguisher?

UK fire safety regulations suggest that fire extinguishers should be replaced or undergo an extended service every 5 years. However, there are conditions to this. Fire extinguishers must have been well-maintained and fully operational. This includes conducting monthly visual checks and an annual inspection by a qualified fire extinguisher engineer. No extinguisher should exceed 20 years in use. If the fire extinguisher is damaged or in any way not fit for use, it needs to be serviced or replaced immediately. The same applies if it has been discharged; it must be replaced without delay.

How Often Should I Inspect A Fire Extinguisher?

Monthly Fire Extinguisher Inspections

Each month, you should conduct a visual inspection of your fire extinguishers. Here's what to look for:

• Signs of damage such as corrosion or leakage, or evidence that the fire extinguisher has been interfered with.
• Issues with the hose or nozzle, such as cracks, blockages, or tears
• Absent or broken locking pins, seals, and tamper indicators
• A damaged or loose handle
• A missing service label. Ensure all labels and tags on fire extinguishers are readable and if the last service was over a year ago, arrange one immediately.
• Don't forget to document your monthly checks
• Ensure the pressure gauge is in the green zone and lift the extinguisher to make sure it feels full
• Check that fire extinguishers are easily visible, not blocked, and the operating instructions are clean and facing outwards. You should also check they are clearly signposted and accessible

Annual fire extinguisher inspections

A qualified fire extinguisher engineer should conduct an annual fire extinguisher inspection. They’ll conduct a full maintenance check with detailed examination, and, if necessary, carry out repairs in line with the Regulatory Reform (Fire Safety) Order 2005 and BS5306 guidelines. After passing its annual service, the fire extinguisher will be tagged and dated. If the extinguisher cannot be adequately repaired so it is in good working order, it must be replaced.

Note that a competent fire extinguisher engineer will not only service the equipment but also assess its placement to ensure it's still correctly positioned and installed on its stand. They will evaluate how fire extinguishers are arranged and whether that's still suitable for the hazards in that area. It's recommended to engage a BAFE registered engineer for your fire extinguisher inspection. BAFE is the independent certification registration organisation for the fire protection industry, and they validate a business's ability to provide fire protection services. This way, you can be sure the engineer is fully competent and meets all the relevant standards.

Remember, it is a legal requirement to keep records of all fire extinguisher inspections, servicing, and maintenance.

In addition to maintaining extinguishers, you should ensure that your fire risk assessment is up to date, with no unresolved actions from your most recent audit. It's crucial that all employees know about any existing fire safety plans and procedures, including the location of fire extinguishers, escape routes, and assembly points. Regular fire drills and fire alarm tests should be conducted to ensure staff are familiar with escape paths and their specific roles. You should regularly check your fire and emergency safety signs to ensure all are present, correct and offering sufficient guidance.

Every workplace will have its unique set of fire safety measures and plans, all employees and visitors should be clear on what to do in the event of a fire on your premises.